Skip to content
First time customers use code SAVE10 to save 10% on your entire order
First time customers use code SAVE10 to save 10% on your entire order

UVA Trichome Enhancement Puck

$32.00
AC Adapter
Puck Mounting Bracket


Features

Help maximize trichomes by running this UVA puck during the last two weeks of flower

We recommend two pucks per 4' x 4' during the end of flower

Each puck simply requires 12V DC power (or 16V depending on the forward voltage of the LEDs which may vary). A 16V adapter will be included instead if necessary. Kindly note that this puck may run at hotter temperatures when the 16V DC adapter is required. To power multiple pucks we suggest using our DC Power Splitter with a larger power supply such as the 30VDC Power Supply

Optional Mounting Bracket is one half of our Driver Bracket and will only mount to our Canopy Rails. This item does not require a separate heatsink

Please note that due to the wavelength of the LEDs we do not recommend using a lens unless it is made of glass. While an optional lens is available for our other 4 LED pucks using one with this puck means you will likely need to replace it every 6-12 months

Optional PWM dimming 

Specifications

Total Wattage : 12.5W

LEDs : 390-400nm CUN96A1B

Driver : Mean Well LDD-700LS

Mounting Holes : 35mm And 50mm Apart

DC Power Connector : 5.5mm OD/2.5mm ID

Dimming Signal : Optional 2.5-6V PWM

Dimensions : 67mm X 67mm (~2.6" X 2.6")

Instructions

1-2 pucks per 4' x 4' towards the end of your flower cycle

Features

Help maximize trichomes by running this UVA puck during the last two weeks of flower

We recommend two pucks per 4' x 4' during the end of flower

Each puck simply requires 12V DC power (or 16V depending on the forward voltage of the LEDs which may vary). A 16V adapter will be included instead if necessary. Kindly note that this puck may run at hotter temperatures when the 16V DC adapter is required. To power multiple pucks we suggest using our DC Power Splitter with a larger power supply such as the 30VDC Power Supply

Optional Mounting Bracket is one half of our Driver Bracket and will only mount to our Canopy Rails. This item does not require a separate heatsink

Please note that due to the wavelength of the LEDs we do not recommend using a lens unless it is made of glass. While an optional lens is available for our other 4 LED pucks using one with this puck means you will likely need to replace it every 6-12 months

Optional PWM dimming 

Specifications

Total Wattage : 12.5W

LEDs : 390-400nm CUN96A1B

Driver : Mean Well LDD-700LS

Mounting Holes : 35mm And 50mm Apart

DC Power Connector : 5.5mm OD/2.5mm ID

Dimming Signal : Optional 2.5-6V PWM

Dimensions : 67mm X 67mm (~2.6" X 2.6")

Instructions

1-2 pucks per 4' x 4' towards the end of your flower cycle