Mass Medical Strains Supplement Bar

This simple to use, plug and play mixed color board is designed to fill in often overlooked/lacking wavelengths in traditional lighting. The light recipe was designed by Mass Medical Strains. Dimming of three separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensity

A heatsink is not required for heat, however may come in handy to give the board rigidity. Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink will fit this strip and will slide into the 4' x 4' Canopy Substrate, however it will NOT fit the Substrate included with the Mass Med Kit. Please select the option with Canopy Brackets if using within a Canopy Substrate

Each board contains:
-3 x SemiLEDs 390-400nm LED
-3 x SemiLEDs 400-410nm LED
-2 x SemiLEDs 410-420nm LED
-1 x SemiLEDs 420-430nm LED
-3 x CREE XP-E2 Blue LED
-9 x CREE XP-G3 Photo Red LED
-4 x CREE XP-E2 Far Red LED
-2 x SemiLEDs Infrared 840-870nm LED

Accessories:
-30V Power Supply (each power supply can run two boards)
-DC Power Splitter can be used to run two boards off one power supply 

Wattage Draw : ~60 Watts From LEDs

LEDs : CREE XP-E2/XP-G3 And SemiLEDs

Driver : Mean Well LDD-700LS

Dimmable : Yes, Controller Required