Skip to content
First time customers use code SAVE10 to save 10% on your entire order
First time customers use code SAVE10 to save 10% on your entire order

Emerson Effect Booster Board

Sold out
$79.00
Add Power Supply
Supplemental Canopy Heatsink


Features

For Canadian customers this can be purchased domestically using CAD by visiting our Canadian site 

This simple to use, plug and play two-channel photo and far red board is designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity

The board comes with 12 x XP-G3 Photo Red and 6 x XP-E2 Far Red LEDs, 2 x Mean Well LDD-700LS drivers, a WAGO connector for dimming and a DC barrel connector for easy, solderless power

Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink was designed to fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate

Can be combined with the Emerson or Exotic Booster Boards by using a DC Power Splitter.

If you are using your own power supply you will need to supply between 30-36VDC constant voltage, and a minimum of 30W per board

Optional Accessories:

-1 x 30VDC Power Supply
-1 x Supplemental Canopy Heatsink
-2 x Eye Bolts and 1 x Rope Ratchet Hanging Kit

Specifications

LED Wattage : ~30W

LEDs : XP-G3 Photo Red and XP-E2 Far Red

Drivers : Mean Well LDD-700LS

Coverage Area : 2' X 4'

Compatible Lens : Ledil Florence

DC Power Connector : 5.5mm OD/2.5mm ID

Dimming Signal : Optional 2.5-6V PWM

Dimensions : 974mm X 47.5mm (~38.5" X 1.9") 

Instructions

Keep on during flower for increased yields

Features

For Canadian customers this can be purchased domestically using CAD by visiting our Canadian site 

This simple to use, plug and play two-channel photo and far red board is designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity

The board comes with 12 x XP-G3 Photo Red and 6 x XP-E2 Far Red LEDs, 2 x Mean Well LDD-700LS drivers, a WAGO connector for dimming and a DC barrel connector for easy, solderless power

Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink was designed to fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate

Can be combined with the Emerson or Exotic Booster Boards by using a DC Power Splitter.

If you are using your own power supply you will need to supply between 30-36VDC constant voltage, and a minimum of 30W per board

Optional Accessories:

-1 x 30VDC Power Supply
-1 x Supplemental Canopy Heatsink
-2 x Eye Bolts and 1 x Rope Ratchet Hanging Kit

Specifications

LED Wattage : ~30W

LEDs : XP-G3 Photo Red and XP-E2 Far Red

Drivers : Mean Well LDD-700LS

Coverage Area : 2' X 4'

Compatible Lens : Ledil Florence

DC Power Connector : 5.5mm OD/2.5mm ID

Dimming Signal : Optional 2.5-6V PWM

Dimensions : 974mm X 47.5mm (~38.5" X 1.9") 

Instructions

Keep on during flower for increased yields