
Mass Medical Strains Supplement Bar
.
.
This simple to use, plug and play mixed color board is designed to fill in often overlooked/lacking wavelengths in traditional lighting. The light recipe was designed by Mass Medical Strains. Dimming of three separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensity
A heatsink is recommended for heat dissipation and to provide support/rigidity to the strip. The Supplemental Canopy Heatsink will fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate
Each board contains:
-3 x Seoul Viosys 385nm LED
-3 x Seoul Viosys 405nm LED
-2 x Seoul Viosys 420nm LED
-1 x Seoul Viosys 395nm LED
-3 x CREE XP-E2 Blue LED
-9 x CREE XP-G3 Photo Red LED
-4 x CREE XP-E2 Far Red LED
-2 x SemiLEDs Infrared 840-870nm LED
Accessories:
-32V Power Supply (each power supply can run two boards)
-DC Power Splitter can be used to run two boards off one power supply
Wattage Draw : ~60 Watts From LEDs
LEDs : CREE XP-E2/XP-G3, Seoul Viosys, SemiLEDs
Driver : Mean Well LDD-700LS
Dimmable : Yes, Controller Required
This simple to use, plug and play mixed color board is designed to fill in often overlooked/lacking wavelengths in traditional lighting. The light recipe was designed by Mass Medical Strains. Dimming of three separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensity
A heatsink is recommended for heat dissipation and to provide support/rigidity to the strip. The Supplemental Canopy Heatsink will fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate
Each board contains:
-3 x Seoul Viosys 385nm LED
-3 x Seoul Viosys 405nm LED
-2 x Seoul Viosys 420nm LED
-1 x Seoul Viosys 395nm LED
-3 x CREE XP-E2 Blue LED
-9 x CREE XP-G3 Photo Red LED
-4 x CREE XP-E2 Far Red LED
-2 x SemiLEDs Infrared 840-870nm LED
Accessories:
-32V Power Supply (each power supply can run two boards)
-DC Power Splitter can be used to run two boards off one power supply
Wattage Draw : ~60 Watts From LEDs
LEDs : CREE XP-E2/XP-G3, Seoul Viosys, SemiLEDs
Driver : Mean Well LDD-700LS
Dimmable : Yes, Controller Required