Skip to content
First time customers use code SAVE10 to save 10% on your entire order
First time customers use code SAVE10 to save 10% on your entire order

Mass Medical Strains Supplement Bar

Sold out
$149.00
Add Power Supply
Supplemental Canopy Heatsink

.

Features

*Please note the picture is of our Exotic board which looks very similar to this board, we'll update the picture ASAP

This simple to use, plug and play mixed color board is designed to fill in often overlooked/lacking wavelengths in traditional lighting. The light recipe was designed by Mass Medical Strains. Dimming of three separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensity

A heatsink is not required for heat, however may come in handy to give the board rigidity. Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink will fit this strip and will slide into the 4' x 4' Canopy Substrate, however it will NOT fit the Substrate included with the Mass Med Kit. Please select the option with Canopy Brackets if using within a Canopy Substrate

Each board contains:
-3 x SemiLEDs 390-400nm LED
-3 x SemiLEDs 400-410nm LED
-2 x SemiLEDs 410-420nm LED
-1 x SemiLEDs 420-430nm LED
-3 x CREE XP-E2 Blue LED
-9 x CREE XP-G3 Photo Red LED
-4 x CREE XP-E2 Far Red LED
-2 x SemiLEDs Infrared 840-870nm LED

Accessories:
-30V Power Supply (each power supply can run two boards)
-DC Power Splitter can be used to run two boards off one power supply 

Specifications

Wattage Draw : ~60 Watts From LEDs

LEDs : CREE XP-E2/XP-G3 And SemiLEDs

Driver : Mean Well LDD-700LS

Dimmable : Yes, Controller Required

Features

*Please note the picture is of our Exotic board which looks very similar to this board, we'll update the picture ASAP

This simple to use, plug and play mixed color board is designed to fill in often overlooked/lacking wavelengths in traditional lighting. The light recipe was designed by Mass Medical Strains. Dimming of three separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensity

A heatsink is not required for heat, however may come in handy to give the board rigidity. Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink will fit this strip and will slide into the 4' x 4' Canopy Substrate, however it will NOT fit the Substrate included with the Mass Med Kit. Please select the option with Canopy Brackets if using within a Canopy Substrate

Each board contains:
-3 x SemiLEDs 390-400nm LED
-3 x SemiLEDs 400-410nm LED
-2 x SemiLEDs 410-420nm LED
-1 x SemiLEDs 420-430nm LED
-3 x CREE XP-E2 Blue LED
-9 x CREE XP-G3 Photo Red LED
-4 x CREE XP-E2 Far Red LED
-2 x SemiLEDs Infrared 840-870nm LED

Accessories:
-30V Power Supply (each power supply can run two boards)
-DC Power Splitter can be used to run two boards off one power supply 

Specifications

Wattage Draw : ~60 Watts From LEDs

LEDs : CREE XP-E2/XP-G3 And SemiLEDs

Driver : Mean Well LDD-700LS

Dimmable : Yes, Controller Required