Dual Emerson/Violit Booster Board Set
$180.00
.
Features
This dual board set includes everything needed to power two Emerson or Violit Boards without the need for any wire nuts, WAGOs, soldering, etc and covers a 4' x 4' to 5' x 5' space
Items included in set:
2 x Emerson Effect Booster Boards or 2 x Violit Booster Boards or 1 x Emerson + 1 x Exotic Board
1 x 30V Power Supply
1 x DC Power Splitter
The Emerson Board is a simple to use, plug and play two-channel photo (660nm) and far red (730nm) board designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity
The Violit Board is designed to help round out spectrums not normally produced by white LEDs (365-370nm and 390-400nm) to help trichome production. Dimming of two separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensity
Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink was designed to fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate. *Heatsink highly recommended for the Violit Board as this light generates plenty of heat at full power
Optional Accessories:
-2 x Supplemental Canopy Heatsink
-4 x Eye Bolts and 1 x Rope Ratchet Hanging Kit
Specifications
LED Wattage : ~30-35W Per Board
LEDs : CREE Photo + Far Red/SemiLEDs UVA
Drivers : Mean Well LDD-700LS
Coverage Area : ~2' X 4' per Board
Compatible Lens : Ledil Florence
DC Power Connector : 5.5mm OD/2.5mm ID
Dimming Signal : Optional 2.5-6V PWM
Dimensions : 974mm X 47.5mm (~38.5" X 1.9") Per Board
Instructions
Use the Emerson board during the entire flower cycle. Turn Exotic board on the last 2-4 weeks of flower
Features
This dual board set includes everything needed to power two Emerson or Violit Boards without the need for any wire nuts, WAGOs, soldering, etc and covers a 4' x 4' to 5' x 5' space
Items included in set:
2 x Emerson Effect Booster Boards or 2 x Violit Booster Boards or 1 x Emerson + 1 x Exotic Board
1 x 30V Power Supply
1 x DC Power Splitter
The Emerson Board is a simple to use, plug and play two-channel photo (660nm) and far red (730nm) board designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity
The Violit Board is designed to help round out spectrums not normally produced by white LEDs (365-370nm and 390-400nm) to help trichome production. Dimming of two separate channels requires a controller such as the Storm, and running without a controller will simply turn on all the lights at 100% intensity
Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink was designed to fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate. *Heatsink highly recommended for the Violit Board as this light generates plenty of heat at full power
Optional Accessories:
-2 x Supplemental Canopy Heatsink
-4 x Eye Bolts and 1 x Rope Ratchet Hanging Kit
Specifications
LED Wattage : ~30-35W Per Board
LEDs : CREE Photo + Far Red/SemiLEDs UVA
Drivers : Mean Well LDD-700LS
Coverage Area : ~2' X 4' per Board
Compatible Lens : Ledil Florence
DC Power Connector : 5.5mm OD/2.5mm ID
Dimming Signal : Optional 2.5-6V PWM
Dimensions : 974mm X 47.5mm (~38.5" X 1.9") Per Board
Instructions
Use the Emerson board during the entire flower cycle. Turn Exotic board on the last 2-4 weeks of flower