Skip to content
First time customers use code SAVE10 to save 10% on your entire order
First time customers use code SAVE10 to save 10% on your entire order

Emerson Effect Booster Board

$79.00
Add Power Supply
Supplemental Canopy Heatsink

.

Features

This simple to use, plug and play two-channel photo and far red board is designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity

The board comes with 12 x XP-G3 Photo Red and 6 x XP-E2 Far Red LEDs, 2 x Mean Well LDD-700LS drivers, a WAGO connector for dimming and a DC barrel connector for easy, solderless power

Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink was designed to fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate

Can be combined with the Emerson or Exotic Booster Boards by using a DC Power Splitter.

If you are using your own power supply you will need to supply between 30-36VDC constant voltage, and a minimum of 30W per board

Optional Accessories:

-1 x 30VDC Power Supply
-1 x Supplemental Canopy Heatsink
-2 x Eye Bolts and 1 x Rope Ratchet Hanging Kit

Specifications

LED Wattage : ~30W

LEDs : XP-G3 Photo Red and XP-E2 Far Red

Drivers : Mean Well LDD-700LS

Coverage Area : 2' X 4'

Compatible Lens : Ledil Florence

DC Power Connector : 5.5mm OD/2.5mm ID

Dimming Signal : Optional 2.5-6V PWM

Dimensions : 974mm X 47.5mm (~38.5" X 1.9") 

Instructions

Keep on during flower for increased yields

Features

This simple to use, plug and play two-channel photo and far red board is designed to help increase plant metabolism (yields) via the Emerson Effect. In addition, if you have a controller you can keep the far red lights on for an additional 15 minutes after lights out for flower initiation. Running without a controller will turn on all the lights at 100% intensity

The board comes with 12 x XP-G3 Photo Red and 6 x XP-E2 Far Red LEDs, 2 x Mean Well LDD-700LS drivers, a WAGO connector for dimming and a DC barrel connector for easy, solderless power

Doesn't require a separate heatsink though we recommend using one to provide support/rigidity to the strip. The Supplemental Canopy Heatsink was designed to fit this strip and will slide into the 4' x 4' Canopy Substrate. Please select the option with Canopy Brackets if using within a Canopy Substrate

Can be combined with the Emerson or Exotic Booster Boards by using a DC Power Splitter.

If you are using your own power supply you will need to supply between 30-36VDC constant voltage, and a minimum of 30W per board

Optional Accessories:

-1 x 30VDC Power Supply
-1 x Supplemental Canopy Heatsink
-2 x Eye Bolts and 1 x Rope Ratchet Hanging Kit

Specifications

LED Wattage : ~30W

LEDs : XP-G3 Photo Red and XP-E2 Far Red

Drivers : Mean Well LDD-700LS

Coverage Area : 2' X 4'

Compatible Lens : Ledil Florence

DC Power Connector : 5.5mm OD/2.5mm ID

Dimming Signal : Optional 2.5-6V PWM

Dimensions : 974mm X 47.5mm (~38.5" X 1.9") 

Instructions

Keep on during flower for increased yields