80 Degree CREE XM-L2/XP-L2 Lens/Optics

Easily stays on CREE XM-L2/XP-L2 Series LEDs via self-adhesive backing

Please note due to the shape of the lens using screws with this lens may be difficult. Also, there are two cut-outs on the side of the lens for solder joints though depending on the size of the solder joint the lens may not sit flush with the LED

This lens does NOT fit the XM-L2/XP-L2 regular LEDs at this time (soldering keeps the lens from sitting flush) on the pcb. This DOES however fit the solderless version of the LEDs 

80 degree beam width

Peel off backing on bottom of lens to expose self-adhesive backing. Carefully place over XM-L2 (solderless) LED without touching the LED diode